Cutting accuracy, combined with mechanical performance and reliability, means you get high-quality results from the BU-1040 Computer Controlled Contour Cutter. The base frame is made of heavy duty structural tubular steel with aluminum harp and carriage. A micro stepper drive with 25,000 pulses per revolution with a minimum backlash reducer of .001" on a 3" radius assures precision cutting and reliability. The unit is motion controlled by a Parker 6K Processor with an Eason 1000 remote interface for jog and program execution making it feasible to download onto numerous machines thus eliminating the need for a PC at each cutting station. Precise tracking of both axes is provided by high quality Thomson shafts and linear bearings.

This system can do it all…taking an untrimmed block of foam, contouring it, cutting it to length and width, and down cutting it…all on one machine, in one location, to reduce material handling. 

Production can be doubled on pieces with one flat and one contoured surface by using the convenient drag wire option. Computer control means that drag wire temperatures are regulated according to the motion of the contour cutting wires.

BENEFITS AND OTHER FEATURES

• Provided with AutoCad Lt 98 and Corel Draw Select for letters and clipart 
• CompuCam converts any DXF file to a cutting program 
• Cut programs are downloaded across RS232 or ethernet connections to the Processor allowing use of your PC while cutting occurs
• Compatible with Windows software
• Hand-held remote control
• Easy to make and store duplicate patterns for pattern protection
• Change speed on the fly
• Cut one pattern or multiple patterns at the operator’s discretion
• Metric software available with metric cutter
• Like all Tri Technologies cutting equipment, the BU-1040 Contour Cutter is supplied with isolation transformers to provide ground fault safety.

EXPAND YOUR SYSTEM WITH

• Horizontal and vertical drag wires

• DC option

• Re-circulating wire for engineered foams and corrugated products

• Formica top with squaring lip

EXPAND YOUR SYSTEM WITH

• Horizontal drag wire harp

• Vertical drag wire harp

• Formica top with squaring lip

• Optional PC Enclosure and Remote Harp Mounted Controls (shown below)

POWER REQUIREMENTS

220/240 VAC three phase	150 amp service
440/480 VAC three phase	100 amp service
380 VAC three phase 50 hz	100 amp service

STANDARD SIZES

• Cutting width of   4 ft    -    length of 8 ft, 12 ft or 16 ft
• Cutting width of   8 ft    -    length of 8 ft, 12 ft or 16 ft
• Cutting width of 12 ft    -    length of 8 ft, 12 ft or 16 ft
• Other lengths available as specified by customer.