COMPUTER CONTROLLED CONTOUR CUTTER 	
	                                                MODEL:  BU-1040 (2 AXIS)
                                
Cutting accuracy, combined with mechanical performance and reliability, means you get high-
quality results from the BU-1040 Computer Controlled Contour Cutter.  The base frame is made 
of heavy duty structural tubular steel with aluminum harp and carriage.  A micro stepper drive 
with 25,000 pulses per revolution with a minimum backlash reducer of .001” on a 3” radius 
assures precision cutting and reliability.  The unit is motion controlled by a Parker 6K Processor 
with an Eason 1000 remote interface for jog and program execution making it feasible to 
download onto numerous machines thus eliminating the need for a PC at each cutting station.  
Precise tracking of both axes is provided by high quality Thomson shafts and linear bearings.

This system can do it all…taking an untrimmed block of foam, contouring it, cutting it to length 
and width, and down cutting it…all on one machine, in one location, to reduce material handling.  

Production can be doubled on pieces with one flat and one contoured surface by using the 
convenient drag wire option.  Computer control means that drag wire temperatures are regulated 
according to the motion of the contour cutting wires.   

Harp positioning is simplified by use of a hand-held remote control.  Both the contour harp and 
the drag harp will handle up to 70 wires each.  The optional wire package can add even more 
versatility to your contour cutting.


BENEFITS AND OTHER FEATURES

? Provided with AutoCad Lt 98 and Corel Draw Select for letters and clipart
? CompuCam converts any DXF file to a cutting program
? Cut programs are downloaded across RS232 or ethernet connections to the Processor 
allowing use of your PC while cutting occurs
? Compatible with Windows software
? Hand-held remote control
? Easy to make and store duplicate patterns for pattern protection
? Change speed on the fly
? Cut one pattern or multiple patterns at the operator’s discretion
? Metric software available with metric cutter
? Like all Tri Technologies cutting equipment, the BU-1040 Contour Cutter is supplied with 
isolation transformers to provide ground fault safety.
? Standard widths of 4, 8 or 12 ft with lengths of 8, 12 or 16 ft.  Other sizes available as 
specified by the customer.


EXPAND YOUR SYSTEM WITH

? Horizontal and vertical drag wires
? DC option
? Re-circulating wire for engineered foams and corrugated products
? Formica top with squaring lip