Two Axis Cutter Retrofit for BU-1040 - tri technologies inc. Cutting Machines for the EPE, EPP EPS and Foam Industry.

Page Downloads

tritechnologies.com
and our other domains:

FoamCutters.com
FoamCutting.com
HotWireCutter.com
HotWireCutting.com
EPEequipment.com
EPPequipment.com
EPSequipment.com

COMPUTER CONTROLLED CONTOUR
CUTTER RETROFIT
MODEL: BU-1040-6KR

The BU-1040-6KR Contour Cutter Retrofit is designed to improve both part design capability and operating efficiency of the BU-1040 Contour Cutter. The system separates the design function from the operating function. This allows part design to be done on a separate computer located away from the machine and into a more design friendly environment, should you wish to do so. By separating the two functions, part design and part cutting can be done simultaneously.

The operating function is provided by an operator interface that is located at the machine. The interface has been designed to be as user friendly as possible to allow less skilled labor to be trained to operate the machine. The 6K Controller is built for and industrial environment and is located at the machine. It is capable of communicating with the design computer by means of and RS232 or ethernet connection.

Programs can be designed in a DFX format file and downloaded to the controller for execution. Depending on program size, because of the nature of the files when downloaded, a number of files can be stored at the machine simultaneously, allowing you to download less often.

The 6KR System also provides enhancements over the Tri Technologies 6200 Controller and can be retrofit to other manufacturers' contour cutters as well.

Other system features are outlined below.

System Features

Download programs from a remote computer to the 6K Controller

Code is edited automatically

Select programs by name or number (some limitations exist on file names) on the Eason Operator Interface located at the machine

Select the number of repeat cuts that you want

Select the cut speed

Program can be paused and continued

System Includes the Following

1 Each          Parker Compumotor 6K2 Controller with Motion Architect Software
1 Each          Eason 1000 Programmable Operator Interface
2 Each          Zeta 8 amp Stepper Drives
1 Each          CompuCam Software for contour motion control
1 Each          CamConvert* Software set up program

*CamConvert is a proprietary software program owned by Tri Technologies

Tri Technologies Inc. 1967 Kingsview Drive Lebanon, Ohio 45036 USA
1967 Kingsview Drive Lebanon, Ohio 45036 USA
Telephone 513-459-1300 Fax 513-459-9636

Machines and Systems to Process Expandable Polystyrene

For detailed information on any of our products, you are invited to call, write or email.