COMPUTER CONTROLLED CONTOUR CUTTER
MODEL: BU-1040 RETROFIT
 
The BU-1040-6KR Contour Cutter Retrofit is designed to improve both 
part design capability and operating efficiency of the BU-1040 Contour 
Cutter.  The system separates the design function from the operating 
function.  This allows part design to be done on a separate computer 
located away from the machine and into a more design friendly 
environment, should you wish to do so.   By separating the two 
functions, part design and part cutting can be done simultaneously.
The operating function is provided by an operator interface that is 
located at the machine.  The interface has been designed to be as user 
friendly as possible to allow less skilled labor to be trained to operate the 
machine.  The 6K Controller is built for and industrial environment and is 
located at the machine.  It is capable of communicating with the design 
computer by means of and RS232 or ethernet connection.
Programs can be designed in a DFX format file and downloaded to the 
controller for execution.  Depending on program size, because of the 
nature of the files when downloaded, a number of files can be stored at 
the machine simultaneously, allowing you to download less often.
The 6KR System also provides enhancements over the Tri Technologies 
6200 Controller and can be retrofit to other manufacturers' contour 
cutters as well.
Other system features are outlined below.
 

 
System Features
    Download programs from a remote computer to the 6K Controller
    Code is edited automatically
    Select programs by name or number (some limitations exist on
        file names) on the Eason Operator Interface located at the machine
    Select the number of repeat cuts that you want
    Select the cut speed
    Program can be paused and continued
 

 
System Includes the Following
1 Each     Parker Compumotor 6K2 Controller with Motion Architect Software
1 Each     Eason 1000 Programmable Operator Interface
2 Each     Zeta 8 amp Stepper Drives
1 Each     CompuCam Software for contour motion control
1 Each     CamConvert*  Software set up program

*CamConvert is a proprietary software program owned by Tri Technologies